SIDS (Sudden Infant Death Syndrome) has been a worry on every new parent’s mind for a long time and its cause has been a mystery for just as long. Scientists all over the world claim that SIDS can happen to any infant, anywhere, any time, and there is absolutely nothing the parents can do to stop it. Most parents simply resign themselves to this and say that there is nothing that they can do to stop SIDS from occurring, but the fact is that a new study out of New Zealand claims to know the cause of it.
The answer lies within the crib the child sleeps in! The chemicals of arsenic, phosphorus, and antimony were first manufactured into crib mattresses back in the mid 1900’s and these chemicals are required by law to be in mattresses as a fire retardant. But, it is not just the mattress alone that causes the crib death, the study says. It is only when mold finds its way into the mattress that you begin to have a problem. When Scopulariopsis brevicaulis gets into one of these mattresses that has these chemicals in it, it begins to feed on them and releases them back into the air as toxic fumes or nerve gases. It is activated by heat and so when the baby sleeps on it (or especially when it has a fever), the mold begins to grow more quickly and lets the gases out into the air.
While the gas disperses almost immediately, it is still dangerous for infants to sleep on the mattresses because they are breathing too close to the surface of it. They are breathing these gases while they are still potent and this is what causes crib death.
So, what can you do? Do not use anything in the crib that contains these chemicals and wrap the mattress in plastic to keep these dangerous gases from escaping. It’s best to do this when the mattress is brand new so you know there isn’t any mold in it and if you have an old mattress that was given to you by friends or relatives to use, throw it away. There are special baby mattress wraps that you can use to wrap up your baby’s mattress, but are only available from New Zealand.
Also, use only materials such as 100% Egyptian cotton blankets for your baby to sleep on. Do not use sheepskin, polyester, anything that is quilted, padded, or filled, pillows or cushions. 100% cotton is the best thing to use.
Jim Corkern is a writer and promoter of quality
Miami water damage restoration companies and
mold remediation companies across the united states.
Saturday, September 29, 2007
Protecting Your Basement From Mold
While you should protect all areas of your home from mold, the basement is one of the most common areas to find it. Since it is underground, dark, and can be a moist, cluttered environment, this is almost the perfect place for mold to grow in the home. You might be able to smell the mold in your basement, but be unable to see it because it tends to hide behind sheetrock, wallpaper, under carpets, rugs, and etcetera. If you suspect mold exists in your basement, then the best thing to do is call in a professional or buy a mold testing kit. What can you do after the mold in your basement is removed to keep it from returning? Here are a few tips.
If there are any water spills or leaky pipes in your basement, do your best to get them cleaned up and dried as quickly as possible. Mold loves moisture and will grow almost anywhere that it exists. It can start to grow in as little as 48 hours after water is introduced to an environment.
A humidity meter can be purchased at the hardware store and you want to try and keep the humidity in the basement below 60 to 65 percent. You can also purchase a de-humidifier to help with this if you’re having trouble controlling the humidity. If you see condensation on your basement windows or on any pipes, dry these surfaces immediately and continue to try and reduce the humidity.
If your clothes dryer or shower is located in the basement, make sure that the hot air it puts out is vented to the outside.
The soil outside your home should be sloped away from the foundation so that water flows away from the basement. If it is not, water will begin to leak inside and allow mold to begin growing in the house.
Keep the air moving around in the basement. Allowing air to become stagnant is another factor that encourages mold to grow. Well-ventilated areas of the home are rarely as moldy as areas that have no ventilation at all.
Try not to store papers or cardboard boxes directly on the floor. Mold likes to eat anything that has its base in organic material, especially paper and wood of any kind. It is the natural job of mold to decompose organic material, but you do not want it doing this in your basement.
Jim Corkern is a writer and promoter of quality
flood water damage restoration chicago and other states such as
New Jersey mold remediation contractor companies across the united states.
If there are any water spills or leaky pipes in your basement, do your best to get them cleaned up and dried as quickly as possible. Mold loves moisture and will grow almost anywhere that it exists. It can start to grow in as little as 48 hours after water is introduced to an environment.
A humidity meter can be purchased at the hardware store and you want to try and keep the humidity in the basement below 60 to 65 percent. You can also purchase a de-humidifier to help with this if you’re having trouble controlling the humidity. If you see condensation on your basement windows or on any pipes, dry these surfaces immediately and continue to try and reduce the humidity.
If your clothes dryer or shower is located in the basement, make sure that the hot air it puts out is vented to the outside.
The soil outside your home should be sloped away from the foundation so that water flows away from the basement. If it is not, water will begin to leak inside and allow mold to begin growing in the house.
Keep the air moving around in the basement. Allowing air to become stagnant is another factor that encourages mold to grow. Well-ventilated areas of the home are rarely as moldy as areas that have no ventilation at all.
Try not to store papers or cardboard boxes directly on the floor. Mold likes to eat anything that has its base in organic material, especially paper and wood of any kind. It is the natural job of mold to decompose organic material, but you do not want it doing this in your basement.
Jim Corkern is a writer and promoter of quality
flood water damage restoration chicago and other states such as
New Jersey mold remediation contractor companies across the united states.
Penicillin and Your New Baby
Ever since Penicillin was put into mass production back in the 1940’s, it has been noted that some people have experienced adverse reactions to the drug. What is penicillin?
Penicillin is an antibiotic that has been used for the past 70 years or so to treat different kinds of illnesses and infections. It comes from the mold penicillin notatum, which is a blue-green kind of mold sometimes found growing on food. Before the invention of this drug, infections and diseases that are only minor to us could very well be fatal. Because it is made from mold and reproduces quickly, it’s not very difficult to manufacture at all and therefore it is the most popular antibiotic in use worldwide today.
If you are allergic to penicillin or know someone who is, you might know a bit about what to expect if your new baby is allergic. If not, you should know that an allergic reaction to penicillin, especially at such a young age, can be fatal. These reactions can be anything from a simple skin rash all the way to breathing difficulties that can be life-threatening. If you go to a doctor regularly, you should have had to answer a question on a form that asked if you were allergic to penicillin. This is so they know whether or not they can administer the drug if you are admitted to the hospital because it is the most frequently occurring drug allergy in existence today.
Even though penicillin is a drug made from mold designed to help us fight infections, you can be allergic to it like any other mold. The medical industry is unsure why some people have reactions to penicillin and some do not, but knowing if you are allergic is very important. Some only have minor symptoms when exposed to the drug and some can be put near death by it. The only treatment for being allergic to the drug is simply not to use it. There are other antibiotics that can be used to fight infections besides penicillin.
The symptoms of a penicillin allergy include swollen lips, tongue, and face or sometimes rashes or hives that can cover a large area of the body. The most life-threatening reaction to the drug is when the bronchial airway becomes extremely swollen and it causes difficulty breathing. This can be followed by a drop in your blood pressure and will cause lightheadedness. This kind of reaction can be fatal and if you experience any of these symptoms after receiving a dose of penicillin, you should tell your doctor as soon as you can. If you are allergic, it’s possible that your newborn will be allergic as well, so your child’s doctor needs to know this before giving them a dose of the drug.
Jim Corkern is a writer and promoter of quality
North Carolina Mold Remediation and other states such as
New Jersey Sewage Damage Cleanup companies across the united states.
Penicillin is an antibiotic that has been used for the past 70 years or so to treat different kinds of illnesses and infections. It comes from the mold penicillin notatum, which is a blue-green kind of mold sometimes found growing on food. Before the invention of this drug, infections and diseases that are only minor to us could very well be fatal. Because it is made from mold and reproduces quickly, it’s not very difficult to manufacture at all and therefore it is the most popular antibiotic in use worldwide today.
If you are allergic to penicillin or know someone who is, you might know a bit about what to expect if your new baby is allergic. If not, you should know that an allergic reaction to penicillin, especially at such a young age, can be fatal. These reactions can be anything from a simple skin rash all the way to breathing difficulties that can be life-threatening. If you go to a doctor regularly, you should have had to answer a question on a form that asked if you were allergic to penicillin. This is so they know whether or not they can administer the drug if you are admitted to the hospital because it is the most frequently occurring drug allergy in existence today.
Even though penicillin is a drug made from mold designed to help us fight infections, you can be allergic to it like any other mold. The medical industry is unsure why some people have reactions to penicillin and some do not, but knowing if you are allergic is very important. Some only have minor symptoms when exposed to the drug and some can be put near death by it. The only treatment for being allergic to the drug is simply not to use it. There are other antibiotics that can be used to fight infections besides penicillin.
The symptoms of a penicillin allergy include swollen lips, tongue, and face or sometimes rashes or hives that can cover a large area of the body. The most life-threatening reaction to the drug is when the bronchial airway becomes extremely swollen and it causes difficulty breathing. This can be followed by a drop in your blood pressure and will cause lightheadedness. This kind of reaction can be fatal and if you experience any of these symptoms after receiving a dose of penicillin, you should tell your doctor as soon as you can. If you are allergic, it’s possible that your newborn will be allergic as well, so your child’s doctor needs to know this before giving them a dose of the drug.
Jim Corkern is a writer and promoter of quality
North Carolina Mold Remediation and other states such as
New Jersey Sewage Damage Cleanup companies across the united states.
Mold Trouble in Florida
If you live in Florida, you have probably experienced some damage to your home due to hurricanes, especially water damage. Mold also likes to start growing in homes that have been water damaged after hurricanes and other storms, especially since Florida is characterized by warm and moist weather. Mold can start to grow in these homes after about 48 hours, so it’s important to get any standing water in the home removed and the home dried out as soon as possible.
A large amount of all the buildings in Florida have to deal with some kind of water or mold damage and a lot of the time this is due to the frequent hurricanes that hit the state almost every single year. The electricity goes down and people are not able to use their air conditioners to help air out and dry the home. Air conditioners can also help to remove humidity by keeping the house at a certain temperature.
If you want to have a healthy and safe indoor environment to live in, you need to make sure your air conditioner is properly serviced as often as is necessary. If it is an old system and has a lot of problems, it is probably best to just replace it instead of doing work on it repeatedly.
Sometimes indoor air quality tests need to be done and not just in Florida. Mold testing should be done and while it’s become a multi-million dollar business industry, it is a necessary one. Mold has been proved to be very harmful to human (and animal) health. When you choose a company to do mold testing or remediation keep it in mind not to choose the same company to do both for you. If a company does both mold testing and removal, it is in their best interest for them to find mold on your property, so even if they say there is mold there, it might not be.
Make sure they have the latest technology in mold testing such as infrared thermal cameras, mold spore counters, air moisture meters, and etcetera. The company should also have a microbiologist in house and certified mold inspectors.
They should inspect the air conditioner, the exterior, plumbing, and they should perform moisture tests around the whole house.
You should do these things even if you do not live in Florida, but a large part of the state of Florida is at risk for water and mold damage because of the moisture and humidity that can exist there.
Jim Corkern is a writer and promoter of quality
North Carolina Mold Remediation and other states such as
New Jersey Sewage Damage Cleanup companies across the united states.
A large amount of all the buildings in Florida have to deal with some kind of water or mold damage and a lot of the time this is due to the frequent hurricanes that hit the state almost every single year. The electricity goes down and people are not able to use their air conditioners to help air out and dry the home. Air conditioners can also help to remove humidity by keeping the house at a certain temperature.
If you want to have a healthy and safe indoor environment to live in, you need to make sure your air conditioner is properly serviced as often as is necessary. If it is an old system and has a lot of problems, it is probably best to just replace it instead of doing work on it repeatedly.
Sometimes indoor air quality tests need to be done and not just in Florida. Mold testing should be done and while it’s become a multi-million dollar business industry, it is a necessary one. Mold has been proved to be very harmful to human (and animal) health. When you choose a company to do mold testing or remediation keep it in mind not to choose the same company to do both for you. If a company does both mold testing and removal, it is in their best interest for them to find mold on your property, so even if they say there is mold there, it might not be.
Make sure they have the latest technology in mold testing such as infrared thermal cameras, mold spore counters, air moisture meters, and etcetera. The company should also have a microbiologist in house and certified mold inspectors.
They should inspect the air conditioner, the exterior, plumbing, and they should perform moisture tests around the whole house.
You should do these things even if you do not live in Florida, but a large part of the state of Florida is at risk for water and mold damage because of the moisture and humidity that can exist there.
Jim Corkern is a writer and promoter of quality
North Carolina Mold Remediation and other states such as
New Jersey Sewage Damage Cleanup companies across the united states.
Saturday, September 8, 2007
Home Canned Food and Mold
Most of us like homegrown and prepared food, but sometimes when we can them in glass containers when we have too much garden produce to eat or too much to just give away, it does not all go according to plan. There are some tried and true canning techniques that have been in use in the past century or more, but sometimes we forget to use common sense when we are canning and this can lead to mold contamination in our food that we worked so hard to prepare and preserve.
We like to can our own food because we know exactly what chemicals and pesticides are going into it. Most of us do not like the idea of chemicals being put onto our food, even if they are deemed “safe” by the government or FDA. Sometimes the chemicals that they say are safe today are not safe tomorrow. But, mold contamination can be just as dangerous as any pesticide or preservative and there are a few things that you can do as a home canner to prevent this from happening to your canned items.
Make sure that the fruits and vegetables that you are canning are of the best quality from your garden. If they have any bad spots on them, cut these off or simply do not can them. Fruits and vegetables need to be washed and some need to be peeled before you can them. Starting with good quality ingredients is key.
Do not pack the food too tightly into the jars that you will can them in. The food in the center does not get to the high temperature that it needs to in order to kill bacteria and mold spores. You should pack food loosely, with at least a few inches from the top of the jar, depending on the size that you are canning in.
After you fill the jars, put the lids and the bands on. Start processing the food immediately so that mold and bacteria do not have a chance to start growing. If mold spores get into the jar, you might have a problem, because sometimes high temperatures just do not kill mold spores. Make sure any equipment that you use is completely sterile.
If you do happen to find mold growing in a jar after you open it, just throw it away. Foods that have a high amount of moisture are not salvageable when they become contaminated.
Jim Corkern is a writer and promoter of quality
flood water damage restoration New Jersey and and other states such as
Connecticut Water Damage Restoration companies across the united states.
We like to can our own food because we know exactly what chemicals and pesticides are going into it. Most of us do not like the idea of chemicals being put onto our food, even if they are deemed “safe” by the government or FDA. Sometimes the chemicals that they say are safe today are not safe tomorrow. But, mold contamination can be just as dangerous as any pesticide or preservative and there are a few things that you can do as a home canner to prevent this from happening to your canned items.
Make sure that the fruits and vegetables that you are canning are of the best quality from your garden. If they have any bad spots on them, cut these off or simply do not can them. Fruits and vegetables need to be washed and some need to be peeled before you can them. Starting with good quality ingredients is key.
Do not pack the food too tightly into the jars that you will can them in. The food in the center does not get to the high temperature that it needs to in order to kill bacteria and mold spores. You should pack food loosely, with at least a few inches from the top of the jar, depending on the size that you are canning in.
After you fill the jars, put the lids and the bands on. Start processing the food immediately so that mold and bacteria do not have a chance to start growing. If mold spores get into the jar, you might have a problem, because sometimes high temperatures just do not kill mold spores. Make sure any equipment that you use is completely sterile.
If you do happen to find mold growing in a jar after you open it, just throw it away. Foods that have a high amount of moisture are not salvageable when they become contaminated.
Jim Corkern is a writer and promoter of quality
flood water damage restoration New Jersey and and other states such as
Connecticut Water Damage Restoration companies across the united states.
General Rules For Mold Testing Kits
If you are unfortunate enough to have to test your home for mold, you are probably thinking that this is going to be a pretty inconvenient thing to have to do. Well, it might not be fun to think that you have disease-causing mold living in your house, but doing the actual test to determine if it exists is not really that hard to conduct at all. Whatever kind of test kit you end up using, the directions on the package must be followed to the exact letter or you will probably render the test useless. There are a few quite general rules that you should follow to get the most out of your testing kits.
If you can see the mold growing in your wall, ceilings, carpet, or on anything else in the home, you do not really have to do any guesswork as to whether you need to test the home or not. If you see anything like this, do not only test that room; test your entire home. Every room needs to be tested and this includes the ventilation system, because it extends to every room in the house and if mold is growing in the vents, it will spread to the rest of the house.
Run the air conditioner or fans in every room in your home before you put out the test kits so that if there are any mold spores in the room, they will be stirred up into the air and will settle down in the kit. Do not set them up anywhere high; a coffee table or somewhere around the mid to low level of the room should be fine. If you set them up too high, you may not get a good sample.
If there happens to be mold growing visibly on anything, you can use a piece of scotch tape to lift the mold up off the surface and place it into the test kit. There is a method that you can use involving scraping some of the mold into the kit with a knife, but since this can stir up mold spores even more, unless you are wearing a respirator, you are probably better off using the tape method.
To test the ventilation system, the best thing that you can do is tape a test against the grill of one of the ventilation ducts so that the air coming out of it is hitting the testing kit at a 90 degree angle. This will allow you to get the maximum amount of exposure.
Jim Corkern is a writer and respected contributor to the Water damage restoration and mold remediation Industry. Visit his sites for more information.
http://www.floodchicago.info
http://www.damagewatersc.info
If you can see the mold growing in your wall, ceilings, carpet, or on anything else in the home, you do not really have to do any guesswork as to whether you need to test the home or not. If you see anything like this, do not only test that room; test your entire home. Every room needs to be tested and this includes the ventilation system, because it extends to every room in the house and if mold is growing in the vents, it will spread to the rest of the house.
Run the air conditioner or fans in every room in your home before you put out the test kits so that if there are any mold spores in the room, they will be stirred up into the air and will settle down in the kit. Do not set them up anywhere high; a coffee table or somewhere around the mid to low level of the room should be fine. If you set them up too high, you may not get a good sample.
If there happens to be mold growing visibly on anything, you can use a piece of scotch tape to lift the mold up off the surface and place it into the test kit. There is a method that you can use involving scraping some of the mold into the kit with a knife, but since this can stir up mold spores even more, unless you are wearing a respirator, you are probably better off using the tape method.
To test the ventilation system, the best thing that you can do is tape a test against the grill of one of the ventilation ducts so that the air coming out of it is hitting the testing kit at a 90 degree angle. This will allow you to get the maximum amount of exposure.
Jim Corkern is a writer and respected contributor to the Water damage restoration and mold remediation Industry. Visit his sites for more information.
http://www.floodchicago.info
http://www.damagewatersc.info
Cleaning Out Your Refrigerator
I love my food, but unfortunately, if I do not remember to keep my refrigerator cleaned out regularly, mold loves my food, too. Often people who have busy lives working and taking care of children cannot remember to clean their refrigerators out as often as they probably need to and since they have more people in the house to feed, there will also be more food. More food in the refrigerator equals more of an opportunity for bacteria and mold to grow. This is not typically a problem as long as someone keeps an inventory of what is in the refrigerator and what needs to be thrown away. You cannot completely keep mold out of your refrigerator because it exists in its spore form in the air that we breathe and unless we are talking about an extremely controlled situation like a hospital clean room, it is truly everywhere. There is not really any escaping it and while mold can grow in your fridge, you can do things to inhibit its growth rate.
Take anything that is outdated and obviously inedible out of your refrigerator and throw it away. Cleaning out everything from the refrigerator and setting it aside to go through later is a good idea when you need to clean out the entire refrigerator and sterilize it. Gather whatever chemicals you might want to use for cleaning the fridge and while this can include bleach, you might want to find another alternative that kills mold and bacteria specifically. If you only have bleach, though, go ahead and use it; just do not mix bleach with any other household chemicals.
Wash all the surfaces in the refrigerator with whatever cleaning solution you have decided on, including the racks in the door and the shelves and drawers inside the main part of the unit itself. Give it a good and thorough scrubbing. This is probably something that you should consider doing between two and three times a year or possibly more, depending on how messy your fridge gets.
When you are done cleaning the inside of the refrigerator (and the outside, if it needs it), it is time to go through what you took out. Take anything that you no longer desire and is no longer edible and throw it away. If any jars have any sticky residue on the bottoms of them, wash these off with a warm rag so you don’t get sticky grape jelly or whatever it is back on the surface of your clean fridge.
im Corkern is a writer and promoter of quality
South Carolina Water Damage Restoration and and other states such as
Chicago Water Damage Restoration companies across the united states.
Take anything that is outdated and obviously inedible out of your refrigerator and throw it away. Cleaning out everything from the refrigerator and setting it aside to go through later is a good idea when you need to clean out the entire refrigerator and sterilize it. Gather whatever chemicals you might want to use for cleaning the fridge and while this can include bleach, you might want to find another alternative that kills mold and bacteria specifically. If you only have bleach, though, go ahead and use it; just do not mix bleach with any other household chemicals.
Wash all the surfaces in the refrigerator with whatever cleaning solution you have decided on, including the racks in the door and the shelves and drawers inside the main part of the unit itself. Give it a good and thorough scrubbing. This is probably something that you should consider doing between two and three times a year or possibly more, depending on how messy your fridge gets.
When you are done cleaning the inside of the refrigerator (and the outside, if it needs it), it is time to go through what you took out. Take anything that you no longer desire and is no longer edible and throw it away. If any jars have any sticky residue on the bottoms of them, wash these off with a warm rag so you don’t get sticky grape jelly or whatever it is back on the surface of your clean fridge.
im Corkern is a writer and promoter of quality
South Carolina Water Damage Restoration and and other states such as
Chicago Water Damage Restoration companies across the united states.
Cleaning Out the Fridge to Prevent Mold
With the obsession that many households in the United States have with food, one would think that we would remember to keep our refrigerators cleaned a lot more often than we do. Many of us have families to take care of and jobs to tend so, so maybe it is because we just do not have time to take care of this necessary chore like we used to or perhaps we think that the problem is not as bad as we are supposed to think it is. Most people realize that bacteria and mold can grow in the refrigerator almost as easily as outside it because of the large amount of food we keep inside it and a lot of the time our food is improperly stored, which opens it to contamination even further than normal. To keep a healthy kitchen, you need to clean out your refrigerator often; clean it out completely at least once every three or four months and here is how you can start.
Remove everything from the fridge, including from the doors, and set it aside wherever you are comfortable with leaving it. The best place is on the kitchen or dining room table or just your kitchen counters. If you do not have room, set things on a table somewhere, as leaving them in the floor is not exactly practical, especially if your floor is not clean.
Take every removable part of your fridge out and set them in a sink of hot water. If you are putting glass shelves in it, rinse them with warm water first to make sure the sudden temperature change does not crack the glass. This water should also contain plenty of antibacterial soap. Allow these to soak a few minutes, especially if they have any sticky residue like from jelly or syrup.
Start washing out the inside of the refrigerator with a rag or a sponge. Use a warm bowl of water and a spray bottle of whatever chemical you have chosen for this job. You can use bleach, but do not mix it with other household chemicals that you might have on hand and always wear rubber gloves. Make sure to get any food that is stuck onto the surface of the refrigerator off before you start putting things back.
When you are done cleaning the inside and done washing the removable shelves and racks, start putting them back. Then, go through the items that you took out and throw out anything that is stale, spoiled, or contaminated with mold.
im Corkern is a writer and respected contributor to the Water damage restoration and mold remediation Industry. Visit his sites for more information.
http://www.localrestoration.com and
http://www.moldrestorationusa.com
Remove everything from the fridge, including from the doors, and set it aside wherever you are comfortable with leaving it. The best place is on the kitchen or dining room table or just your kitchen counters. If you do not have room, set things on a table somewhere, as leaving them in the floor is not exactly practical, especially if your floor is not clean.
Take every removable part of your fridge out and set them in a sink of hot water. If you are putting glass shelves in it, rinse them with warm water first to make sure the sudden temperature change does not crack the glass. This water should also contain plenty of antibacterial soap. Allow these to soak a few minutes, especially if they have any sticky residue like from jelly or syrup.
Start washing out the inside of the refrigerator with a rag or a sponge. Use a warm bowl of water and a spray bottle of whatever chemical you have chosen for this job. You can use bleach, but do not mix it with other household chemicals that you might have on hand and always wear rubber gloves. Make sure to get any food that is stuck onto the surface of the refrigerator off before you start putting things back.
When you are done cleaning the inside and done washing the removable shelves and racks, start putting them back. Then, go through the items that you took out and throw out anything that is stale, spoiled, or contaminated with mold.
im Corkern is a writer and respected contributor to the Water damage restoration and mold remediation Industry. Visit his sites for more information.
http://www.localrestoration.com and
http://www.moldrestorationusa.com
Prevent Mold From Growing On Your Stuff
I know that I do not like mold on my stuff and you probably do not, either, but sometimes we dig into our closets and discover an old favorite item of clothing only to find that it is stinky and covered in mold. What a disappointment. This happens more often than some of us realize and the solution that we usually come up with is just to throw the item away. But, why let it get that way in the first place? What can you do to stop mold from getting on your things? There are a few different ways to help prevent mold from growing not only just in your home, but also on your stuff.
Since we are already talking about moldy clothes, one of the worst things that you can do is to pack your clothing extremely tightly into your closet. Maybe you have an aunt or a grandmother that has a closet packed to the brim with clothing that they never wear, but they might not realize that by trying to save space, they are actually helping mold to grow in the closet full of the clothes that they love so much. Air cannot circulate in these packed closets and add to that high humidity and warmth and you get mold. Some closets have vents installed in the floors to help alleviate this problem, but packing the closets so tight you can barely move them aside to get the shirt or pair of pants that you want completely defeats the purpose of the vent. Try not to pack your closets so full and if you cannot help it, simply get rid of some clothes.
Wet clothes are also particularly a problem, especially during the summertime when people go swimming. These are often thrown on the floor of the laundry room and left for some other person to pick up, but if you are the person that is supposed to pick them up, please do so. Wash wet clothes as soon as you can, especially if you can do this before they dry out. If you can help it, never throw dry clothes on top of wet ones because you will forget about them and mold will begin to grow pretty soon.
If you have baby bottles or any bottle that is oddly shaped, perhaps with a hollow handle that allows liquid inside, you probably have a hard time getting them completely dry if you do not have a dishwasher. To keep mold from growing in these, simply put them in the freezer after you wash them
Jim Corkern is a writer and promoter of quality
water damage restoration companies and
mold remediation companies across the united states.
Since we are already talking about moldy clothes, one of the worst things that you can do is to pack your clothing extremely tightly into your closet. Maybe you have an aunt or a grandmother that has a closet packed to the brim with clothing that they never wear, but they might not realize that by trying to save space, they are actually helping mold to grow in the closet full of the clothes that they love so much. Air cannot circulate in these packed closets and add to that high humidity and warmth and you get mold. Some closets have vents installed in the floors to help alleviate this problem, but packing the closets so tight you can barely move them aside to get the shirt or pair of pants that you want completely defeats the purpose of the vent. Try not to pack your closets so full and if you cannot help it, simply get rid of some clothes.
Wet clothes are also particularly a problem, especially during the summertime when people go swimming. These are often thrown on the floor of the laundry room and left for some other person to pick up, but if you are the person that is supposed to pick them up, please do so. Wash wet clothes as soon as you can, especially if you can do this before they dry out. If you can help it, never throw dry clothes on top of wet ones because you will forget about them and mold will begin to grow pretty soon.
If you have baby bottles or any bottle that is oddly shaped, perhaps with a hollow handle that allows liquid inside, you probably have a hard time getting them completely dry if you do not have a dishwasher. To keep mold from growing in these, simply put them in the freezer after you wash them
Jim Corkern is a writer and promoter of quality
water damage restoration companies and
mold remediation companies across the united states.
Subscribe to:
Posts (Atom)
